Changing the time until “REST REMINDER” is displayed
The time until the display appears can be changed.
1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
2. Lightly press the multi-information meter switch to select “ALARM” (rest time setting).
3. Press and hold the multi-information meter switch for about 2 seconds or more to display “ALARM” (rest time setting).
4. Lightly press the multi-information meter switch to select the time until
the display.
5. Press and hold the multi-information meter switch for about 2 seconds or more,
the setting is changed to the selected time.
Note
► If the battery is disconnected, the unit setting is erased from memory and
is automatically set to OFF.
► The drive time is reset when the ignition switch is turned off.
See also:
Multi centre display
When the ignition switch is in the ”ACC” position, the outside temperature and
clock are displayed in the multi centre display. When the ignition switch is in
the ”ON” position, the aver ...
Operation of the outside rear-view mirrors (Vehicles equipped with mirror
retractor switch)
To fold
Within 30 seconds of locking the doors and tailgate using the LOCK switch (1),
press the LOCK switch twice rapidly to fold the outside rear-view mirrors.
To extend
Within 30 seconds of un ...
Mark display screen (when the ignition switch is “OFF”)
If you press the multi-information meter switch and return from the warning display
screen to the previous screen, the mark is displayed.
Refer to “To return to the screen displayed before the ...