Diesel preheat indication lamp (diesel-powered vehicles)Diesel preheat indication lamp (diesel-powered vehicles)  - Indication lamps - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This indication lamp illuminates when the ignition switch is placed in the “ON”

This indication lamp illuminates when the ignition switch is placed in the “ON” position. As the glow plug becomes hot, the lamp goes out and the engine can be started.

► If the engine is cold, the diesel preheat indication lamp is on for a longer Note

► If the engine is cold, the diesel preheat indication lamp is on for a longer time.
► When the engine has not been started within about 5 seconds after the diesel preheat indication lamp went out, return the ignition switch to the “LOCK” position.
Then, turn the switch to the “ON” position to preheat the engine again.
► When the engine is warm, the diesel preheat indication lamp does not come on even if the ignition switch is placed in the “ON” position.

    See also:

    Rear-view camera
    The rear-view camera is a system that shows the view behind the vehicle on a screen of the MITSUBISHI Multi Communication System (MMCS) or the inside rear-view mirror. Caution ► The rear- ...

    Inside tailgate release
    The inside tailgate release is designed to provide a way to open the tailgate in the case of a discharged battery. The tailgate release lever (see illustration) is mounted on the tailgate. You a ...

    Setting the system
    Follow the procedure below to set the system to the system armed mode. 1. Turn the ignition switch to the “LOCK” position. If you started the engine with the key, remove the key from the ignitio ...