Engine oil level warning displayEngine oil level warning display - Information screen display - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

When the ignition switch is in the “ON” position, if it is suspected that the

When the ignition switch is in the “ON” position, if it is suspected that the engine oil level has increased excessively, the warning display is displayed on the information screen in the multi-information display.

► If this warning is displayed while driving, stop the vehicle in a safe place, Caution

► If this warning is displayed while driving, stop the vehicle in a safe place, turn off the engine, and check the engine oil level.

Refer to “Engine oil”.

► Immediately have your vehicle checked by a MITSUBISHI MOTORS Authorized Service Note

► Immediately have your vehicle checked by a MITSUBISHI MOTORS Authorized Service Point.

    See also:

    How to lock and unlock the steering wheel
    To lock Remove the key at the “LOCK” position. Turn the steering wheel until it is locked. To unlock Turn the key to the “ACC” position while moving the steering wheel slightly. CAUTION ...

    Engine
    ...

    Hydraulic power steering system (HPS)
    The hydraulic power steering system (HPS) uses a hydraulic pressure pump to assist the turning of the steering wheel. Caution ► Do not leave the steering wheel turned all the way in one dir ...