Lamp monitor buzzerLamp monitor buzzer - Combination headlamps and dipper switch - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

[When the engine was started using the key] If the driver’s door is opened when the key is in the “LOCK” or “ACC” position or removed from the ignition switch while the lamps are on, a buzzer will sound to remind the driver to turn off the lamps.

[When the engine was started using the keyless operation function] If, while the lamps are illuminated, the ignition switch is set to the “LOCK” or “ACC” position, or the driver’s door is opened with the ignition switch set to the “LOCK” position, a buzzer will sound to remind the driver to turn off the lamps.

In both cases, the buzzer will automatically stop if the auto-cutoff function is activated, the lamp switch is turned off, or the door is closed.

    See also:

    Armrest*
    The lid of the floor console box can be moved forward and backward, and used as an armrest. ...

    Checking battery electrolyte level
    The electrolyte level must be between the specified limit on the outside of the battery. Replenish with distilled water as necessary. The inside of the battery is divided into several compartment ...

    Supplemental restraint system (SRS) - airbag
    The information written in this Supplemental Restraint System (SRS) section contains important points concerning the driver, front passenger, driver’s knee, side and curtain airbags. The SRS dr ...