Headlamp flasher
The high-beams flash when the lever is pulled slightly (2), and will go off when it is released.
When the high-beam is on, the high-beam indication lamp in the instrument cluster will illuminate.
Note
► The high-beams can also flash when the lamp switch is OFF.
► If you turn the lamps off with the headlamps set to high-beam, the headlamps are
automatically returned to their low-beam setting when the lamp switch is next turned
to the position.
See also:
To change a tyre
1. On vehicles equipped with wheel covers, first remove the covers (refer to
“Wheel covers”). Then loosen the wheel nuts a quarter turn with the
wheel nut wrench. Do not remove the wheel nuts ...
Welcome light (for vehicles equipped with the keyless entry system or the keyless
operation system)
Except for vehicles for Russia, Kazakhstan and Ukraine, this function turns on
the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on
the remote control transmitter is pre ...
How to adjust the tune
Manual tuning
The frequency changes every time the TUNE/SEEK button (6 or 7) is pressed. Press
the button to select the desired station.
Automatic tuning
After keeping the TUNE/SEEK button (6 or ...