Automatic headlamp levellingAutomatic headlamp levelling  - Headlamp levelling - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This mechanism automatically adjusts the direction of the headlamps (beam position) depending on changes in the condition of the vehicle, such as the number of occupants or luggage weight. When the headlamps are illuminated with the ignition switch in the “ON” position, the beam position of the headlamps is automatically adjusted when the vehicle is stopped.

Headlamp automatic levelling system warning display

If there is a fault in the automatic headlamp levelling system, the warning display

If there is a fault in the automatic headlamp levelling system, the warning display is displayed on the information screen in the multi-information display.

► If the warning is displayed, the system may be malfunctioning. Have the Caution

► If the warning is displayed, the system may be malfunctioning. Have the vehicle inspected at a MITSUBISHI MOTORS Authorized Service Point.

    See also:

    Twin Clutch SST control mode display screen (vehicles equipped with Twin Clutch SST)
    The operation status of the Twin Clutch SST control mode is displayed. Refer to “Twin Clutch SST control mode”. ...

    The front airbags and driver’s knee airbag MAY DEPLOY when…
    The front airbags and driver’s knee airbag may deploy if the bottom of the vehicle suffers a moderateto- severe impact (undercarriage damage). Examples of some typical conditions are shown in the ...

    To install
    Confirm that the head restraint is facing the correct direction, and then insert it into the seatback while pressing the height adjusting knob (A) in the direction indicated by the arrow. Caut ...