Turn-signal leverTurn-signal lever  - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1- Turn-signals

1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to change a lane, the turn-signal lamps and indication lamp in the instrument cluster will only flash while the lever is operated.
Also, when you move the lever to (2) slightly then release it, the turn-signal lamps and indication lamp in the instrument cluster will flash 3 times.

► If the lamp flashes unusually quickly, the bulb in a turn-signal lamp may have Note

► If the lamp flashes unusually quickly, the bulb in a turn-signal lamp may have burned out. We recommend you to have the vehicle inspected.
► It is possible to activate the following functions.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.

Refer to the separate owner’s manual for details.

• Flashing of the turn-signal lamps when the lever is operated with the ignition switch in the “ACC” position.
• Deactivate the turn-signal lamp 3-flash function for lane changes
• The time required to operate the lever for the 3-flash function can be adjusted.

For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.

Refer to the separate owner’s manual for details.

    See also:

    Rheostat (meter illumination control)
    The rheostat can be adjusted while the lamp switch is “” or “”. Turn the dial to adjust the meter illumination to the desired brightness. 1- To increase brightness 2- To reduce brightne ...

    Digital clock
    Following modes are available for clock adjustment: MITSUBISHI genuine audio: “Auto mode” and “Manual mode” Non genuine audio: “Manual mode” only Selection of “Auto mode” or ...

    Damaged paint
    Small cracks and scratches in the paint coat should be touched up as soon as possible with MITSUBISHI touch-up paint to prevent corrosion. Check body areas facing the road or the tyres carefully fo ...