Hazard warning flasher switchHazard warning flasher switch - Instruments and controls - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency.

The hazard warning flashers can always be operated, regardless of the position of the ignition switch.

Push the switch to turn on the hazard warning flashers, all turn-signal lamps flash continuously. To turn them off, push the switch again.

Note

► While the hazard warning lamps are blinking due to having manually pushed the Note

► While the hazard warning lamps are blinking due to having manually pushed the switch, the emergency stop signal system does not operate.
Refer to “Emergency stop signal system”.

    See also:

    iPod control panel and display
    1- AM/FM button 2- CD (Mode change) button 3- PWR (On-Off) button 4- PAGE (Title scroll) button 5- DISP (Title display) button 6- RPT (Repeat) button 7- RDM (Random) button 8- (Fast-revers ...

    Engine coolant temperature display
    This indicates the engine coolant temperature. If the coolant becomes hot, will blink. Pay careful attention to the engine coolant temperature display while you are driving. CAUTION • If ...

    Full-time 4WD
    Full-time 4WD vehicles are propelled by engine power distributed constantly and appropriately to all 4 wheels. Not only does this ensure better handling on dry, paved roads but also permits bette ...