To apply the parking brakeTo apply the parking brake - Parking brake - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1- Firmly depress and hold the brake pedal, then pull the lever up without pushing

1- Firmly depress and hold the brake pedal, then pull the lever up without pushing the button at the end of hand grip.

► When you intend to apply the parking brake, firmly press the brake pedal Caution

► When you intend to apply the parking brake, firmly press the brake pedal to bring the vehicle to a complete stop before pulling the parking brake lever. Pulling the parking brake lever with the vehicle moving could make the rear wheels lock up, thereby making the vehicle unstable.

It could also make the parking brake malfunction.

► Apply sufficient force to the parking brake lever to hold the vehicle stationary Note

► Apply sufficient force to the parking brake lever to hold the vehicle stationary after the foot brake is released.
► If the parking brake does not hold the vehicle stationary after the foot brake is released, have your vehicle checked immediately.

    See also:

    Styling
    Some people suggest that a car's performance is the most important part of any review, but that's not the case with the new Lancer. This is one sharp-looking sedan. Rarely do I test a sub-$20,000 ...

    Engine number
    The engine number is stamped on the engine cylinder block as shown in the illustration. A- Front of the vehicle ...

    Control panel
    A- Temperature control dial B- Air selection switch C- Blower speed selection dial D- Mode selection dial E- Rear window demister switch Note ► Button (F) is not available for use. The ...