To release the parking brakeTo release the parking brake  - Parking brake - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1- Firmly depress and hold the brake pedal, then pull the lever up slightly.

1- Firmly depress and hold the brake pedal, then pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Lower the lever fully.

► Before driving, be sure that the parking brake is fully released and brake Caution

► Before driving, be sure that the parking brake is fully released and brake warning lamp is off.
If you drive without the parking brake fully released, the warning display will appear on the information screen in the multi- information display.
If a vehicle is driven without releasing the parking brake, the brake will be overheated, resulting in ineffective braking and possible brake failure.

Warning lamp

Caution

► If the brake warning lamp does not extinguish when the parking brake is Caution

► If the brake warning lamp does not extinguish when the parking brake is fully released, the brake system may be abnormal.
Have your vehicle checked immediately.

For details, refer to “Brake warning lamp”.

    See also:

    Average fuel consumption display
    This displays the average fuel consumption from the last reset to the present time. There are the following 2 mode settings. For information on how to change the average fuel consumption display s ...

    Warning display list (when the ignition switch is “OFF”)
    ...

    Outlander Sport in the Market
    At first, the Outlander Sport appears like the most affordable compact crossover on the market, which could influence shoppers who are worried about its performance and small cargo area. However, ...