To adjust the mirror positionTo adjust the mirror position - Outside rear-view mirrors - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The outside rear-view mirrors can be operated when the ignition switch is in the “ON” or “ACC” position.

► Do not attempt to adjust the rear-view mirrors while driving. This can be Warning

► Do not attempt to adjust the rear-view mirrors while driving. This can be dangerous.
Always adjust the mirrors before driving.
► Your vehicle is equipped with convex type mirrors. Please take into consideration, that objects you see in the mirror will look smaller and farther away compared to a normal flat mirror.
Do not use this mirror to estimate distance of following vehicles when changing lanes.

1. Place the lever (A) to the same side as the mirror whose adjustment is desired.

L- Left outside mirror adjustment

L- Left outside mirror adjustment
R- Right outside mirror adjustment

2. Press the switch (B) to the left, right, up or down to adjust the mirror position.

1- Up
2- Down
3- Right
4- Left

3. Return the lever (A) back to the middle position Retracting and extending the outside mirrors

    See also:

    Changing the mode selection
    To change the position and amount of air flowing from the ventilators, turn the mode selection dial. (Refer to “Mode selection dial”.) These symbols are used in the next several illustrations ...

    ACD control mode
    Select the control mode from the following three types to suit the driving conditions. ...

    Petrol-powered vehicles
    1600 models AS&G: Auto Stop & Go (AS&G) system Note ► The values shown above apply to a vehicle on which optional equipment has not been fitted. ► The results given do ...