ACC power auto-cutout function
After about 30 minutes has elapsed with the ignition switch in the “ACC” position, the function automatically cuts out the power for the audio system and other electric devices that can be operated with that position.
When the ignition switch is turned from the “ACC” position, the power is supplied again to those devices.
Note
► It is possible to modify functions as follows:
• The time until the power cuts out can be changed to approximately 60 minutes.
• The ACC power auto-cutout function can be deactivated.
For details, we recommend you to consult a MITSUBISHI MOTORS Authorized Service
Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for details.
See also:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the
hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch ...
Headlamp washer switch*
The headlamp washer can be operated with the ignition switch “ON” position and
the lamp switch at “” or “”
position.
1- Push the button once and the washer fluid will be sprayed on ...