Steering wheel lockSteering wheel lock  - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

[For vehicles equipped with keyless operation system]

For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Steering wheel lock” on pages 1-15, 1-19.

[Except vehicles equipped with keyless operation system]

To lock

Remove the key at the “LOCK” position.

Turn the steering wheel until it is locked.

To unlock

Turn the key to the “ACC” position while moving the steering wheel slightly right and left.

Caution

► Remove the key when leaving the vehicle. Caution

► Remove the key when leaving the vehicle.
In some countries, it is prohibited to leave the key in the vehicle when parked.

    See also:

    Welcome light (for vehicles equipped with the keyless entry system or the keyless operation system)
    Except for vehicles for Russia, Kazakhstan and Ukraine, this function turns on the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on the remote control transmitter is pre ...

    Dipper (High/Low beam change)
    When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the highbeam is on, the high-beam indication lamp in t ...

    Odometer/Tripmeter
    The operation method is the same as when the ignition switch or the operation mode is OFF. Refer to “Odometer/Tripmeter” for further details. ...