If the DPF warning display illuminates during vehicle operationIf the DPF warning display illuminates during vehicle operation - Diesel particulate filter (DPF) - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Diesel particulate filter (DPF) / If the DPF warning display illuminates during vehicle operation

Steady illumination of the DPF warning display shows that the DPF has not been able to burn away all of the trapped PM and that, as a result, an excessive amount of PM has accumulated inside it. To enable the DPF to burn away the PM, try to drive the vehicle as follows: ► With the bar graph of engine coolant temperature display stabilized in roughly the middle of the scale, drive for about 20 minutes at a speed of at least 40 km/h (25 mph).

If the DPF warning display subsequently stays on, contact a MITSUBISHI MOTORS Authorized Service Point.

► You do not have to continuously drive exactly as indicated above. Always Caution

► You do not have to continuously drive exactly as indicated above. Always strive to drive safely in accordance with road conditions.

    See also:

    Turn-signal indication lamps/ Hazard warning indication lamps
    These indication lamps blink in the following situations. ► When the turn-signal lever is moved to activate a turn-signal lamp. Refer to “Turn-signal lever”. ► When the hazard war ...

    Outlander Sport in the Market
    At first, the Outlander Sport appears like the most affordable compact crossover on the market, which could influence shoppers who are worried about its performance and small cargo area. However, ...

    Water temperature gauge
    The water temperature gauge indicates the engine coolant temperature when the ignition switch is “ON”. CAUTION If the indication needle enters the overheating zone while the engine is runn ...