To deactivate
The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch.
When the Auto Stop & Go (AS&G) system is deactivated, the
display/indicator will turn on.
To reactivate the Auto Stop & Go (AS&G) system, press the “Auto Stop & Go (AS&G) OFF” switch; the display/indicator will turn off.
Note
► This display/indicator will also turn on for a few seconds when the ignition switch is turned to the “ON” position.
See also:
Power steering fluid
To check the fluid level
Check the fluid level in the reservoir while the engine is idling.
Check to make certain that the power steering fluid level is always between the
“MAX” and “MIN ...
Fuse replacement
1. Before replacing a fuse, always turn off the electrical circuit concerned
and place the ignition switch in the “LOCK” position.
2. Remove the fuse puller (A) from the inside of the fuse box ...
Front ashtray
To use the ashtray, open the lid.
To remove the ashtray, open the lid and lift upward holding the lid.
...