Manual transmissionManual transmission  - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The shift pattern is shown on the gearshift lever knob. During start-up, fully depress the clutch pedal and shift into 1st gear or “R” (Reverse) position.

Then gradually release the clutch pedal while depressing the accelerator pedal.

Caution

► Do not move the gearshift lever into reverse while the vehicle is moving Caution

► Do not move the gearshift lever into reverse while the vehicle is moving forward;
doing so will damage the transmission.
► Do not rest your foot on the clutch pedal while driving as this will cause premature clutch wear or damage.
► Do not coast in the “N” (Neutral) position.
► Do not use the gearshift lever as a handrest, because this can result in premature wear of the transmission shift forks.

► During cold weather, shifting may be difficult until the transmission lubricant Note

► During cold weather, shifting may be difficult until the transmission lubricant has warmed up. This is normal and not harmful to the transmission.
► If it is hard to shift into 1st, depress the clutch pedal again; the shift will then be easier to make.

See also:

Tyres and wheels
...

Overview
The all-new 2008 Mitsubishi Lancer was engineered from bumper to bumper to provide a driven-to-thrill experience behind the wheel. Driving enthusiasts will feel the difference through every curve, ...

Steering wheel height adjustment
To adjust the steering wheel height, release the tilt lock lever while holding the steering wheel by hand, and raise or lower the steering wheel to the desired height. After adjustment, securel ...