Moving the gearshift lever to the “R” (Reverse) position
Vehicles equipped with 5M/T
To shift into the “R” (Reverse) position from 5th gear, move the gearshift lever to the “N” (Neutral) position, and then move it to the “R” (Reverse) position.
Vehicles equipped with 6M/T
Pull up the pull-ring (A), then move the gearshift lever to the “R” (Reverse) position with the pullring still pulled.
Caution
► Do not pull up the pull-ring (A) when moving the gearshift lever to any position other than the “R” (Reverse) position. If you always pulled up the pull-ring (A) when moving the gearshift lever, you could unintentionally move the gearshift lever to the “R” (Reverse) position and cause an accident and/or a transmission fault.
The pull-ring will return to its original position when you return the gearshift lever to the “N” (Neutral) position.
Caution
► If the pull-ring will not return from the pulled-up position, we recommend you to have the vehicle inspected.
Note
► Except for vehicles for Russia, Kazakhstan and Ukraine, the gearshift indicator shows recommended gearshift points for fuel-efficient driving. It shows a when an upshift is recommended, and it shows a when a downshift is recommended.
See also:
Plastic, vinyl leather, fabric and flocked parts
1. Gently wipe off with gauze or other soft cloth soaked with a 3 % aqueous solution
of neutral detergent.
2. Dip cloth in fresh water and wring out well.
Using this cloth, wipe off the detergent ...
Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF”
position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the l ...
Twin Clutch SST control mode display screen (vehicles equipped with Twin Clutch
SST)
The operation status of the Twin Clutch SST control mode is displayed.
Refer to “Twin Clutch SST control mode”. ...