Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch SST control mode switch (A) to change the control mode.
When the engine is started, the control mode is automatically set to the “NORMAL” mode. Use the following procedures to change the control mode.
To shift from “NORMAL” mode to “SPORT” mode
While the vehicle is stopped or being driven, push the Twin Clutch SST control mode switch forward.
To shift from “SPORT” mode to “NORMAL” mode
While the vehicle is stopped or being driven, push the Twin Clutch SST control mode switch rearward.
Note
► If the Twin Clutch SST control mode switch is continuously pushed after a control
mode has been selected, an erroneous operation prevention function operates and
the control mode is automatically set to the “NORMAL” mode.
If you would like to select a control mode again, return the ignition switch to
the “ACC” or “LOCK” position and restart the engine. Then, push the Twin Clutch
SST control mode switch.
See also:
Fuse block
To prevent damage to the electric system due to short-circuiting or overloading,
each individual circuit is provided with a fuse. There are fuse boxes in the passenger
compartment and in the eng ...
2013 Mitsubishi ASX Review
The Mitsubishi Outlander Sport was introduced for the 2011 model year, and
despite a harsh review here on Cars.com, it's sold well. Though it shares the
Outlander name, the Sport is smaller than t ...
Floor mats
Warning
► Keep floor mats clear of the pedals by correctly laying floor mats that
are suitable for the vehicle.
To prevent the floor mats from slipping out of position, securely retain them ...