ParkingParking  - Operation of the Twin Clutch SST - Twin Clutch SST (Sport Shift Transmission) - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To park the vehicle, first bring it to a complete stop, fully engage the parking brake, and then move the gearshift lever to the “P” (PARK) position.

If you are going to leave the vehicle unattended, always switch off the engine and carry the key.

► On a slope, be sure to apply the parking brake before moving the gearshift Note

► On a slope, be sure to apply the parking brake before moving the gearshift lever to the “P” (PARK) position. If you move the gearshift lever to the “P” (PARK) position before applying the parking brake, it may be difficult to disengage the gearshift lever from the “P” (PARK) position when you next drive the vehicle, requiring application of a strong force to the gearshift lever to move from the “P” (PARK) position.

    See also:

    Starting the engine (diesel-powered vehicles)
    [For vehicles equipped with keyless operation system] For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Starting” on pag ...

    Side turn-signal lamps
    Insert a straight blade (or minus) screwdriver at the edge of the lens, remove the socket assembly and bulb together by turning it anticlockwise, and then remove the bulb by pulling out. NOTE ...

    Power steering fluid
    To check the fluid level Check the fluid level in the reservoir while the engine is idling. Check to make certain that the power steering fluid level is always between the “MAX” and “MIN ...