Cautions on handling of 4-wheel drive vehicles

See also:

Front turn-signal lamps
1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper cover (D). 2. Remove the entire socket and bulb assembly (E) by turning it anticlockwise. : Front of the vehicle ...

High–mounted stop lamp
Hatchback Place the groove of clip top as shown, then remove the cover. Undo bolts (A), remove the lamp body, and disconnect the connector. Undo screws (B) and take the bulb out of its socket ...

Operation of the Dead Lock System
In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller. (Refer to “Dead Lock System”.) ...