ACD control mode display
Example: “TARMAC” mode is selected.
The currently selected control mode is displayed on the multi-information display.
In addition, when the control mode is changed, the selected mode appears on the interrupt display screen of the information screen in the multi-information display.
The control mode display will appear on the information screen for a few seconds, and then the original screen will return.
Caution
► The ACD control mode display may flash under aggressive driving conditions.
At this time, ACD control is temporarily suspended in order to protect the ACD device,
but this will not affect normal driving.
After the vehicle is driven for a while, if the ACD control mode display remains
on, the ACD control will start operating again.
See also:
Operation from outside the vehicle
Insert (or remove) the key when the boot lid (or tailgate) key cylinder is in
the vertical or the horizontal position.
Rotate the key to lock or unlock as shown in the illustration.
1- Unlock 2- ...
Reversing lamps
1. Insert a straight blade (or minus) screwdriver with the end covered with a
cloth or other object into the cut out area of the cover and pry gently to remove
the cover.
2. Remove the socket a ...
Auto reset mode
► When the average speed is being displayed, if you hold down the multi-information
meter switch, the average speed displayed at that time is reset.
► If the ignition switch is at “AC ...