Emergency stop signal systemEmergency stop signal system  - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

This is a device that reduces the possibility of rear end collisions by the rapid and automatic blinking of the hazard warning lamps to alert vehicles approaching from behind during sudden braking.

When the emergency stop signal system operates, the hazard warning indication lamp in the instrument cluster blinks rapidly at the same time.

► If the ABS warning or ASC warning is displayed, the emergency stop signal Caution

► If the ABS warning or ASC warning is displayed, the emergency stop signal system may not operate.
Refer to “ABS warning lamp/display”.
Refer to “ASC warning display”.

► [Activating condition for the emergency stop signal system] Note

► [Activating condition for the emergency stop signal system]
It activates when all of the following conditions are met.
• The vehicle speed is approximately 55 km/h (34 mph) or higher.
• The brake pedal has been depressed, and the system judges that it was sudden braking from the vehicle deceleration and the operating condition of the anti-lock brake system (ABS).
[Deactivating condition for the emergency stop signal system]
It deactivates when one of the following conditions is met.
• The brake pedal is released.
• The hazard warning flasher switch is pressed.
• The system judges that it was not sudden braking from the vehicle deceleration and the operating condition of the anti-lock brake system (ABS).

    See also:

    Vehicle care precautions
    In order to maintain the value of your vehicle, it is necessary to perform regular maintenance using the proper procedures. Always maintain your vehicle in compliance with environmental pollution ...

    Types of connectable devices and supported file specifications
    Device types Devices of the following types can be connected. : “iPod touch,” “iPod classic,” “iPod” and “iPod nano” are registered trademarks of Apple Inc. in the United States ...

    Cigarette lighter
    The cigarette lighter can be used while the ignition switch or the operation mode is in ON or ACC. 1- Push all the way in. The cigarette lighter will automatically return to its original positio ...