ASC operation display or ASC OFF displayASC operation display or ASC OFF display - Active stability control (ASC) - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The display/indicator will blink - ASC operation display/ASC indicator
The display/indicator will blink
when the ASC is operating.

This display/incicator will turn on- ASC OFF display/ASC OFF indicator
This display/incicator will turn on
when the ASC is turned off with the
“ASC OFF” switch.

► The combination of items shown on the display varies depending on the vehicle Note

► The combination of items shown on the display varies depending on the vehicle model.

► When display/indicator blinks, Caution

► When ASC is operating, which means that the road is slippery or that your vehicle’s wheels display/indicator blinks, ASC is operating, which means that the road is slippery or that your vehicle’s wheels are beginning to slip. If this happens, drive slower with less accelerator input.
► If the temperature in the braking system continues to increase due to continuous brake control on a slippery road surface, the the brake system from overheating, the brake control of the traction control function display/indicator will blink. To prevent the brake system from overheating, the brake control of the traction control function will be temporarily suspended.
The engine control of the traction control function and normal brake operation will not be affected. Park your vehicle in a safe place. When the temperature in the braking system has come down, the will be turned off and the traction control function will start operating again. display/indicator will be turned off and the traction control function will start operating again.

► The display/indicator may Note

► The turn on when you start the engine. This means that the battery voltage momentarily display/indicator may turn on when you start the engine. This means that the battery voltage momentarily dropped when the engine was started. It does not indicate a malfunction, provided that the display goes out immediately.
► When a compact spare tyre has been put on your vehicle, the gripping ability of the tyre will be lower, making it more likely that the ASC warning display display/indicator will blink.

    See also:

    Washing
    Chemicals contained in the dirt and dust picked up from the road surface can damage the paint coat and body of your vehicle if left in prolonged contact. Frequent washing and waxing is the best way ...

    ACD control mode display
    Example: “TARMAC” mode is selected. The currently selected control mode is displayed on the multi-information display. In addition, when the control mode is changed, the selected mode appears ...

    To enter frequencies into the memory
    Manual setting You can assign to the memory select buttons (3) a maximum of 18 stations in the FM band (6 FM1, 6 FM2 and 6 FM3 stations) and 6 stations each in the MW and LW band. (Stations alrea ...