TowingTowing  - Active stability control (ASC) - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

► When towing the vehicle with only the front wheels or only the rear wheels Caution

► When towing the vehicle with only the front wheels or only the rear wheels raised off the ground, do not place the ignition switch in the “ON” position. Placing the ignition switch in the “ON” position could cause the ASC to operate, resulting in an accident.
Note that the correct towing method depends on the transmission type and the vehicle’s drive configuration. For details, refer to “Towing”.

    See also:

    Heated seats
    The heated seats can be operated with the ignition switch or the operation mode in ON. The indication lamp (A) will illuminate while the heater is on. 1 (HI) - Heater high (for quick heating). ...

    Leg area heating
    Set the mode selection dial to the position shown in the illustration and set the air selection switch (A) to the outside position. Adjust the temperature by turning the temperature control dial ...

    To reduce the set speed
    There are 2 ways to reduce the set speed. Auto–speed control lever Pull down and hold the auto–speed control lever until you reach the lower speed you want. Release the lever when the desire ...