To temporarily increase or decrease the speedTo temporarily increase or decrease the speed  - Cruise control - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To temporarily increase the speed

Depress the accelerator pedal as you would normally.

When you release the pedal, you will return to your set speed.

Note

► In some driving conditions, the set speed driving may be deactivated. If this Note

► In some driving conditions, the set speed driving may be deactivated. If this happens, refer to “To activate” and repeat the speed setting procedure.

To temporarily decrease the speed

Depress the brake pedal to decrease the speed. To return to the previously set speed, press the “ACC RES” switch (C). Refer to “To resume the set speed”.

To deactivate

    See also:

    How to enter PTYs in the memory
    As many as 6 PTYs can be entered in the memory. Follow the steps described below. 1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in the memory. 2. Press one of the mem ...

    To play tracks from a Bluetooth® device (vehicles with Bluetooth® 2.0 interface)
    You can wirelessly connect a digital audio player or cellular phone supporting Bluetooth® to listen to the tracks on the connected device. Refer to “Bluetooth® 2.0 interface” for the connecti ...

    Room lamps
    Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens. Remove the lamp bulb from the lamp holder. NOTE Wrap a piece of cloth aroun ...