To resume the set speedTo resume the set speed  - Cruise control - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

If the set speed driving is deactivated by the condition described in “To deactivate”, you can resume the previously set speed by pressing the “ACC RES” switch (C) while driving at a speed of about 40 km/h (25 mph) or higher.

Under either of the following conditions, however, using the switch does not

Under either of the following conditions, however, using the switch does not allow you to resume the previously set speed.

In these situations, repeat the speed setting procedure:

► The “ON OFF” switch is pressed.
► The ignition switch is turned OFF.
► “CRUISE” indication lamp is turned OFF.

    See also:

    Petrol-powered vehicles without turbo
    ► Select engine oil of the proper SAE viscosity number according to the atmospheric temperature. SAE 0W-20, 0W-30, 5W-30 and 5W-40 engine oils can only be used if they meet ACEA A3/B3, A3 ...

    Centre accessory box
    Push the lid centre (A) to open. ...

    Lamps (headlamps, fog lamp, etc.) auto- cutout function
    ► If, while the lamp switch is in the “ ” position, the ignition switch is turned to the “LOCK” position or “ACC” position, or the key is removed from the ignition switch, the la ...