Reversing sensor system
This system operates when you are backing the vehicle.
It uses corner and back sensors to detect an obstacle and the information screen in the multi-information display and the buzzer to inform you of the approximate distance to the obstacle.
Caution
► The reversing sensor system assists you in determining the approximate distance
between the vehicle and an obstacle located behind the vehicle. It has limitations
in terms of detectable areas and objects, and may not properly detect some objects.
Therefore, do not place excessive confidence in the reversing sensor system and
operate the vehicle as carefully as you would do with a vehicle not equipped with
this system.
► Make sure to check the surroundings with your own eyes to ensure safety. Do not
operate the vehicle by relying on the reversing sensor system alone.
See also:
How to adjust the tune
Manual tuning
The frequency changes every time the TUNE/SEEK button (6 or 7) is pressed. Press
the button to select the desired station.
Automatic tuning
After keeping the TUNE/SEEK button (6 or ...
SRS warning lamp/display
Warning lamp
If there is an error in the system, the warning lamp will come on and the warning
display will appear on the information screen in the multi-information display.
Under normal cond ...
To listen to a CD
1- PWR (On-off switch) 2- U/M/L button 3- CD (CD mode changeover) button
4- Disc loading slot 5- CD eject button 6- DISC (Disc selection) button* 7-
(Track down) button 8- (Track up) button 9- S ...