To operateTo operate  - Reversing sensor system - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To operate the system, move the gearshift lever or selector lever to the “R” position while the ignition switch is in the “ON” position. When the reversing sensor system is operated, the reversing sensor system operation indication lamp (A) will turn on. To stop the operation, push the “SONAR” switch; the reversing sensor system operation indication lamp (A) is turned off.

Note

► Only when the gearshift lever or selector lever is in the “R” position, Note

► Only when the gearshift lever or selector lever is in the “R” position, the reversing sensor system can be operated or be stopped by using the “SONAR” switch.

See also:

Selector lever position display
When the ignition switch is turned to the “ON” position, the position of the selector lever is indicated in the multi-information display. ...

Vehicles with sunroof
Room lamp 1 (OFF) - The lamp goes out. 2 () - The lamp illuminates when a door or the tailgate is opened and goes out when it is closed. 3 (ON) - The lamp illuminates. Spot lamps 4 - The la ...

Testing the system
Open all of the door windows, then set the Dead Lock System. (Refer to “Setting the system”.) After setting the Dead Lock System, reach into the vehicle through a window and confirm that you c ...