Front room & map lampsFront room & map lamps  - Interior lamps - For pleasant driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1 (DOOR) - The lamp illuminates when a door or the rear hatch is opened. It goes

1 (DOOR) - The lamp illuminates when a door or the rear hatch is opened. It goes off about 15 seconds after the door or rear hatch is closed. However, the lamp goes off immediately in the following cases: ► The ignition switch is turned to the “ON” position.

► All the doors and the rear hatch are locked using the central door lock function.

► If the vehicle is equipped with the keyless entry system, when the remote control switch of the keyless entry system is used to lock the vehicle.

► If the vehicle is equipped with the keyless operation system, when the remote control switch of the keyless operation system or the keyless operation function is used to lock the vehicle.

► When the key was used to start the engine, if the key is removed while the Note

► When the key was used to start the engine, if the key is removed while the doors and rear hatch are closed, the lamp is illuminated and after about 15 seconds it goes off.

► When the keyless operation function was used to start the engine, if the ignition switch is turned to the “LOCK” position while the doors and rear hatch are closed, the lamp illuminates and after about 15 seconds it goes off.

► The time until the lamp goes off can be adjusted.

For details, please consult a MITSUBISHI MOTORS Authorized Service Point.

If the vehicle is equipped with the MITSUBISHI Multi-Communication System (MMCS), adjustment can be made using screen operations. Refer to the separate owner’s manual for details.

2 (OFF) - The lamp goes off.

    See also:

    Range of view of rear-view camera
    The range of view of the rear-view camera is limited to the area shown in the illustrations. It cannot show both sides and the lower part of the rear bumper, etc. When reversing, be sure to visua ...

    Connecting the Bluetooth® 2.0 interface and Bluetooth® device
    Before you can make or receive hands-free calls or play music using the Bluetooth® 2.0 interface function, you must pair the Bluetooth® device and Bluetooth ® 2.0 interface. NOTE • Pairing ...

    Tether anchorage locations
    There are 2 child restraint anchorage points located on the back of the seatbacks. These are for fastening the child restraint tether straps to the 2 rear seat seating positions. Warning ` ...