Bottle holder
Caution
► Do not drink beverages while driving the vehicle; doing so could distract
you and result in an accident.
► Beverages can spill due to vibration or other movement during vehicle operation.
Be careful not to get scalded by a hot beverage if spilled
Note
► Make sure the cap of any plastic bottle placed in a bottle holder is tightly
closed.
► The bottle holders may not accommodate bottles of certain shapes and sizes.
For the front seat
The bottle holders are provided at both sides.
See also:
Corner and back sensor locations
There are two corner sensors (A) at the corners of the rear bumper, and two back
sensors (B) in the centre of the rear bumper.
...
To change the indication on the screen of the inside rear-view mirror
It is possible to turn off the screen of the inside rearview mirror and change
the language of the warning messages on the screen.
To temporarily set the non- display mode
If you press the switc ...
Front room & map lamps
When replacing the bulb, put the front room & map lamps switch into the “OFF”
position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the l ...