If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops. Before moving the vehicle to a safe area, be aware of the following: ► The brake booster becomes inoperative and the pedal effort will increase. Press down the brake pedal harder than usual.
► Since the power steering system is no longer operative, the steering wheel feels heavy when turning it.
See also:
When turning from “ACC” to “LOCK”
[Vehicles equipped with M/T] Put the gearshift lever into the “N” (Neutral) position,
and slowly turn the ignition switch to the “LOCK” position while pressing it.
[Vehicles equipped with C ...
Service reminder
Displays the approximate time until the next periodic inspection that MITSUBISHI
MOTORS recommends.
“---” is displayed when the inspection time has arrived.
Note
► Depending on the veh ...
Lamp monitor buzzer
[When the engine was started using the key]
If the driver’s door is opened when the key is in the “LOCK” or “ACC” position
or removed from the ignition switch while the lamps are on, a bu ...
