To remove the spare tyreTo remove the spare tyre - How to change a tyre - For emergencies - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Lift up the board.
2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise.

Note

► Put the spare wheel under the vehicle body near the jack. This makes it safer Note

► Put the spare wheel under the vehicle body near the jack. This makes it safer if the jack slips out of position.

To change a tyre

    See also:

    Aluminium wheels
    1. Remove dirt using a sponge while sprinkling water on the wheel. 2. Use neutral detergent on any dirt that cannot be removed easily with water. Rinse off the neutral detergent after washing the wh ...

    Running-in recommendations
    During the running-in period for the first 1,000 km, it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future economy and perform ...

    Changing the security alarm settings
    It is possible to set the security alarm to the “active” mode or “inactive” mode. Follow the procedure below. 1. Except for vehicles equipped with the keyless operation system, remove the ...