To store the flat tyre or spare wheelTo store the flat tyre or spare wheel - How to change a tyre - For emergencies - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Lift up the board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning it clockwise.

Note

► On vehicles equipped with a compact spare wheel, the clamp cannot be used for Note

► On vehicles equipped with a compact spare wheel, the clamp cannot be used for a normal size tyre.

3. Have your damaged tyre repaired as soon as possible.

To store the tools and jack

Reverse the removing procedure when storing the jack, bar and wheel nut wrench. Refer to “Tools and jack”.

    See also:

    Information screen (when the ignition switch is turned from the “LOCK” position to the “ON” position or the operation mode is changed from OFF to ON)
    When the ignition switch is turned to the “ON” position or the operation mode is put in ON, the display screen switches in the following order. 1- Screen when the ignition switch or the opera ...

    Display unit selection
    Originally, km/h and L/100 km are selected. When you want to select the unit “mile”, follow this procedure. NOTE For vehicles without MITSUBISHI genuine audio system, only the unit of averag ...

    Driver’s knee airbag system
    The driver’s knee airbag is located under the steering wheel. The driver’s knee airbag is designed to deploy at the same time as the driver’s front airbag. ...