Tyres and wheelsTyres and wheels  - Specifications - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Note

► Contact your MITSUBISHI MOTORS Authorized Service Point for details on the Note

► Contact your MITSUBISHI MOTORS Authorized Service Point for details on the combination used on your vehicle.

    See also:

    To change a tyre
    1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.) Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts yet. 2 ...

    “ASC OFF” switch
    The ASC is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing down the “ASC OFF” switch for 3 seconds or longer. Wh ...

    To lock without using the key
    Set the inside lock knob (1) to the locked position, and close the door (2). Note ► The driver’s door cannot be locked using the inside lock knob while the driver’s door is opened. ...