Specifications
See also:
Accessory socket
The accessory socket can be used while the ignition switch is in the “ON” or
“ACC” position.
Caution
► Be aware that using electronic equipment with the engine off may run the
bat ...
Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove
the socket assembly and bulb together by turning it anticlockwise, and then remove
the bulb by pulling out.
NOTE
...
Lamps (headlamps, fog lamp, etc.) auto-cutout function
• If the following operation is performed while the lamp switch is in the
position, the lamps will automatically
go out when the driver’s door is opened.
[Except for vehicles equipped with ke ...
