Vehicle labelingVehicle labeling - Specifications - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Outside rear-view mirrors
To adjust the mirror position The outside rear-view mirrors can be operated when the ignition switch or the operation mode is in ON or ACC. WARNING • Do not attempt to adjust the rear-view mir ...

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Wheel condition
1- Location of the tread wear indicator 2- Tread wear indicator Check the tyres for cuts, cracks and other damage. Replace the tyres if there are deep cuts or cracks. Also check each tyre for pi ...