Engine numberEngine number  - Vehicle labeling - Specifications - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The engine number is stamped on the engine cylinder block as shown in the illustrations.

1600 models

: Front of the vehicle

: Front of the vehicle

Except for 1600 models

: Front of the vehicle

: Front of the vehicle

    See also:

    Starting the engine (petrol-powered vehicles)
    The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...

    Parking
    Parking on a slope Fully engage the parking brake, and then move the gearshift lever to 1st (on an uphill) or reverse (on a downhill) position on manual transmission vehicle. On automatic transmi ...

    Corner and back sensor locations
    There are two corner sensors (A) at the corners of the rear bumper, and two back sensors (B) in the centre of the rear bumper. ...