Automatic headlamp levelling (vehicles with discharge headlamps)Automatic headlamp levelling (vehicles with discharge headlamps)  - Headlamp levelling - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

This mechanism automatically adjusts the direction of the headlamps (beam position) depending on changes in the condition of the vehicle, such as the number of occupants or luggage weight. When the headlamps are illuminated with the ignition switch or the operation mode in ON, the beam position of the headlamps is automatically adjusted when the vehicle is stopped.

Headlamp automatic levelling system warning display

If there is a fault in the automatic headlamp levelling system, the warning display

If there is a fault in the automatic headlamp levelling system, the warning display is displayed on the information screen in the multi-information display.

• If a warning is displayed, the system may be malfunctioning, so we recommend CAUTION

• If a warning is displayed, the system may be malfunctioning, so we recommend you to have your vehicle inspected.

    See also:

    Maximum towable weight with brake and maximum trailer-nose weight
    Never exceed the maximum towable weight with brake and the maximum trailer-nose weight as listed in the specifications. (Refer to “Vehicle weight”.) If you tow a trailer at an altitude of more ...

    To operate
    1. Stop the vehicle completely using the brake pedal. 2. Release the brake pedal and the hill start assist will maintain the braking force applied while stopping for approximately 2 seconds. 3. De ...

    Power type (driver’s side only)
    Adjust the seatback angle by operating the switch as indicated by the arrows. 1- To move to forward direction 2- To recline rearward Note ► To prevent the battery from running down, opera ...