Instruments and controlsInstruments and controls  - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

See also:

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Error codes
If an error code appears in the display, take action in accordance with the table below. ...

Coming home light
This function turns on the headlamps in the low beam setting for about 30 seconds after the ignition switch is turned to the “OFF” position or the operation mode is put in OFF. 1. Turn the co ...