Inside rear-view mirror
Adjust the rear-view mirror only after making any seat adjustments so you have a clear view to the rear of the vehicle.
WARNING
• Do not attempt to adjust the rear-view mirror while driving. This can be dangerous.
Always adjust the mirror before driving.
Adjust the rear-view mirror to maximize the view through the rear window.
To adjust the vertical mirror position
It is possible to move the mirror up and down to adjust its position.
To reduce the glare
The lever (A) at the bottom of the mirror can be used to adjust the mirror to reduce the glare from the headlamps of vehicles behind you during night driving.
1- Normal
2- Anti-glare
See also:
Ignition switch ON reminder system
When the engine was started using the keyless operation function
If the driver’s door is opened with the ignition switch in any position other
than “LOCK” (PUSH OFF) after turning off the e ...
Meter, gauge and indication/ warning lamp operation
Run the engine to check the operation of all meters, gauges, and indication/warning
lamps.
If there is anything wrong, take the vehicle to an authorized MITSUBISHI dealer
for inspection. ...
Operating the air conditioning system
Heating
Set the mode selection dial to the
position and set the air selection switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to the desired temper ...