Safety mechanism
If a hand or head is trapped in a closing window, the window glass will lower automatically.
Please ensure that nobody puts their head or hand out the window when closing. The lowered window will become operational after a few seconds.
CAUTION
The safety mechanism is cancelled just before the window is fully closed. This allows the window to close completely. Therefore be especially careful not to trap a finger by the window.
NOTE
Repeated operation with the engine stopped will run down the battery. Operate the window switches while the engine is running.
See also:
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT ...
Accessory socket
The accessory socket can be used while the ignition switch is in the “ON” or
“ACC” position.
Caution
► Be aware that using electronic equipment with the engine off may run the
bat ...
If the display/indicator blinks while driving
If thedisplay/indicator blinks, the
Auto Stop & Go (AS&G) system is malfunctioning and will not operate.
We recommend you to consult a MITSUBISHI MOTORS Authorized Service Point. ...