For cold and snowy weatherFor cold and snowy weather  - Maintenance - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Ventilation slots

The ventilation slots in front of the windscreen should be kept clear of leaves or brushed clear after heavy snowfall, so that the operation of the heating and ventilation systems will not be impaired.

Weatherstripping

To prevent freezing of the weatherstripping on the doors, bonnet, etc., they should be treated with silicone grease.

Additional equipment

It is a good idea to carry a shovel or a short-handled spade in the vehicle during the winter so that you can clear away snow if you get stranded. A small hand-brush for sweeping snow off the vehicle and a plastic scraper for the windscreen and rear window are also useful.

    See also:

    To temporarily increase or decrease the speed
    To temporarily increase the speed Depress the accelerator pedal as you would normally. When you release the pedal, you will return to your set speed. Note ► In some driving conditions, th ...

    Setting the system
    1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

    Changing the mode selection
    To change the position and amount of air flowing from the ventilators, turn the mode selection dial. (Refer to “Mode selection dial”.) These symbols are used in the next several illustrations ...