Tyres and wheels

NOTE
• Contact your MITSUBISHI MOTORS Authorized Service Point for details on the combination used on your vehicle.
See also:
Rear room lamp
When replacing the bulb, put the rear room lamp switch into the “OFF” position.
1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into
the notch of the lamp assembly a ...
To change a tyre
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2 ...
Parking
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake and then move the selector lever to the “P” (PARK) position.
If you are going to leave the vehicle unatten ...
