Refill capacities



See also:
Setting the system
Follow the procedure below to set the system to the system armed mode.
1. Turn the ignition switch to the “LOCK” position.
If you started the engine with the key, remove the key from the ignitio ...
Steering control switch
1- Volume up button
2- Volume down button
3- SPEECH button
4- PICK-UP button
5- HANG-UP button
Volume up button
Press this button to increase the volume.
Volume down button
Press this butt ...
Front turn-signal lamps
1. Remove the clips (A) and clips (B), then remove the duct (C) and the upper
cover (D).
2. Remove the entire socket and bulb assembly (E) by turning it anticlockwise.
: Front of the vehicle ...
