Mitsubishi Outlander

See also:

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Manual reset mode
► When the average speed is being displayed, if you hold down the multi-information meter switch, the average speed displayed at that time is reset. ► When the ignition switch is switch ...

Jacking up the vehicle
1. Park the vehicle on a level and stable ground. 2. Activate the hazard flashers and turn the ignition key to the “LOCK” position. 3. Set the parking brake firmly, move the gearshift lever (m ...