The security alarm has four modes
See also:
Setting the system
1. Turn the ignition switch to the “LOCK” position.
Also, if a key was used to start the engine, remove the key from the ignition
switch.
2. Get out of the vehicle. Close all doors and rear ha ...
To lock or unlock from outside the vehicle
Vehicles equipped with the key cylinder
1- Lock
2- Unlock ...
Dipper (High/Low beam change)
When the lamp switch is in the position,
the beam changes from high to low (or low to high) each time the lever is pulled
fully (1). While the high beam is on, the high-beam indication lamp in th ...
