Driver’s switchesDriver’s switches  - Electric window control switch - Electric window control - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The driver’s switches can be used to operate all door windows. A window can be opened or closed by operating the corresponding switch.

Press the switch down to open the window, and pull up the switch to close it.

If the switch for the driver’s window is fully pressed down/pulled up, the door window automatically opens/closes completely. If you want to stop the window movement, operate the switch lightly in the reverse direction.

    See also:

    Operating hints
    ► Do not let the clutch slip (vehicles equipped with M/T only) and do not increase the engine speed more than necessary when starting. ► Be sure that the driving speed does not exceed 1 ...

    High–mounted stop lamp
    Hatchback Place the groove of clip top as shown, then remove the cover. Undo bolts (A), remove the lamp body, and disconnect the connector. Undo screws (B) and take the bulb out of its socket ...

    Pretensioner system
    The pretensioner system will retract their respective seat belts instantaneously, thus maximizing the seat belt’s effectiveness, if there is a frontal impact severe enough to injure the driver a ...