To recline the seatback
See also:
Seat belt inspection
(1) Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if defective. (2) A dirty belt should
be cleaned with neutral detergent i ...
Twin Clutch SST control mode
When the ignition switch is set to the “ON” position, operate the Twin Clutch
SST control mode switch (A) to change the control mode.
When the engine is started, the control mode is automatic ...
To unfasten
Hold the latch plate and push the button on the buckle.
Note
► As the belt retracts automatically, keep holding the latch plate while retracting
so that the belt stows slowly. Failure to ...
