Power typePower type  - To adjust seat height (driver’s side only) - Front seat - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

To adjust the seat height, operate the switch as indicated by arrows.

► To prevent the battery from running down, operate the power type seat with Note

► To prevent the battery from running down, operate the power type seat with the engine running.

1- To move the front of the seat up and down

1- To move the front of the seat up and down

2- To move the rear of the seat up and down

2- To move the rear of the seat up and down

3- To move the whole seat up and down

3- To move the whole seat up and down

    See also:

    Turn-signal indication lamps/ Hazard warning indication lamps
    These indication lamps blink in the following situations. ► When the turn-signal lever is moved to activate a turn-signal lamp. Refer to “Turn-signal lever”. ► When the hazard war ...

    The side airbags and curtain airbags ARE NOT DESIGNED TO DEPLOY when…
    The side airbags and curtain airbags are not designed to deploy in conditions where they cannot usually provide protection to the occupant. Typical conditions are shown in the illustration. 1- ...

    If the DPF warning display illuminates during vehicle operation
    Steady illumination of the DPF warning display shows that the DPF has not been able to burn away all of the trapped PM and that, as a result, an excessive amount of PM has accumulated inside it. T ...