Tether anchorage locationsTether anchorage locations - Installing a child restraint system to the lower anchorage (ISOFIX child restraint mountings) and tether anchorage - Child restraint - Seat and seat belts - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

There are 2 child restraint anchorage points located on the back of the seatbacks. These are for fastening the child restraint tether straps to the 2 rear seat seating positions.

Warning

► Child restraint anchorages are designed to withstand only those loads imposed Warning

► Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle.

► Do not use the rear seat centre tether anchorage with ISOFIX mountings. Note

► Do not use the rear seat centre tether anchorage with ISOFIX mountings.

    See also:

    Assist grips
    The assist grips (located above the doors on the headliner) are not designed to support body weight. They are intended for use only while seated in the vehicle. CAUTION • Do not use the assi ...

    To decrease the set speed
    There are 2 ways to decrease the set speed. “COAST SET” switch Press and hold the “COAST SET” switch (B) while driving at the set speed, and your speed will slow down gradually. When you ...

    Rear room lamp
    When replacing the bulb, put the rear room lamp switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly a ...